- This topic is empty.
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
51 PANACEA
LENGTH
51' 0"
BEAM
14' 8"
50 EVOLUTION
LENGTH
47' 6"
BEAM
13' 8"
475 PANACEA
LENGTH
47' 6"
BEAM
13' 8"
438 EVOLUTION
LENGTH
43' 0"
BEAM
12' 8"
43 NOMAD
LENGTH
42' 7"
BEAM
12' 8"
427 NOMAD FE
LENGTH
42' 7"
BEAM
12' 8"
41 VALOR
LENGTH
41' 8.5"
BEAM
11' 9"
409 VALOR
LENGTH
40' 0"
BEAM
11' 1"
41 PANACEA
LENGTH
40' 0"
BEAM
11' 9"
41 NOMAD
LENGTH
40' 0"
BEAM
11' 9"
407 NOMAD FE
LENGTH
40' 0"
BEAM
11' 1"
375 NOMAD SE
LENGTH
37' 6"
BEAM
10' 6"
375 NOMAD FE
LENGTH
37' 6"
BEAM
10' 6"
345 VALOR
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD SE
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD FE
LENGTH
34' 6"
BEAM
10' 6"
327 NOMAD
LENGTH
32' 7"
BEAM
9' 10"
327 VALOR
LENGTH
32' 7"
300 NOMAD
LENGTH
30' 0"
BEAM
9' 6"
477 Evolution
LENGTH
47’ 6”
BEAM
13’ 8”
“Hi Joe,
I have a 2005 30′ centre console with twin verado 250’s. It spends most of the time in the water and is only on the trailer for service etc. I have recently had the bunks on my trailer replaced. It looks as though the new bunks do not have the change in level the old ones used to have (for the step in the hull). The service provider lifted the boat onto the trailer and said it was fine. If the bunks are flat will this cause a structural problem/stress on the hull when it is on the trailer?
Thanks for the advice.
Brian”