- This topic is empty.
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
51 PANACEA
LENGTH
51' 0"
BEAM
14' 10"
50 EVOLUTION
LENGTH
47' 6"
BEAM
13' 8"
475 PANACEA
LENGTH
47' 6"
BEAM
13' 8"
438 EVOLUTION
LENGTH
43' 0"
BEAM
12' 8"
43 NOMAD
LENGTH
42' 7"
BEAM
12' 8"
427 NOMAD FE
LENGTH
42' 7"
BEAM
12' 8"
41 VALOR
LENGTH
41' 8.5"
BEAM
11' 9"
409 VALOR
LENGTH
40' 0"
BEAM
11' 1"
41 PANACEA
LENGTH
40' 0"
BEAM
11' 9"
41 NOMAD
LENGTH
40' 0"
BEAM
11' 9"
407 NOMAD FE
LENGTH
40' 0"
BEAM
11' 1"
375 NOMAD SE
LENGTH
37' 6"
BEAM
10' 6"
375 NOMAD FE
LENGTH
37' 6"
BEAM
10' 6"
345 VALOR
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD SE
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD FE
LENGTH
34' 6"
BEAM
10' 6"
327 NOMAD
LENGTH
32' 7"
BEAM
9' 10"
327 VALOR
LENGTH
32' 7"
300 NOMAD
LENGTH
30' 0"
BEAM
9' 6"
“Hi:
I’m Tom McGrath and very happy Intrepid owner for the last eight years.
The hull ID is: IBW31031C596.
It’s spring and after doing some work getting ready for the season, I’m hoping you can help me with info about the following:
The gas tank sizes and which fuel fill is for the main tank (forward or aft);
The dry or wet weight of the boat;
Getting the screws in the middle of the anodes out to replace them (they back out to a point and then refuse to come any further-they just spin)(what is on the inside backing); and,
What size screw, with what thread, was used to secure the stainless support for the aft fiberglass platform on the port side of the engines to the hull from beneath (One has come out and the stainless support needs to be re-secured into a hole at the very bottom, left corner of the transom)?
Thank you in advance,
Tom McGrath
256-520-5961
“