- This topic is empty.
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
51 PANACEA
LENGTH
51' 0"
BEAM
14' 10"
50 EVOLUTION
LENGTH
47' 6"
BEAM
13' 8"
475 PANACEA
LENGTH
47' 6"
BEAM
13' 8"
438 EVOLUTION
LENGTH
43' 0"
BEAM
12' 8"
43 NOMAD
LENGTH
42' 7"
BEAM
12' 8"
427 NOMAD FE
LENGTH
42' 7"
BEAM
12' 8"
41 VALOR
LENGTH
41' 8.5"
BEAM
11' 9"
409 VALOR
LENGTH
40' 0"
BEAM
11' 1"
41 PANACEA
LENGTH
40' 0"
BEAM
11' 9"
41 NOMAD
LENGTH
40' 0"
BEAM
11' 9"
407 NOMAD FE
LENGTH
40' 0"
BEAM
11' 1"
375 NOMAD SE
LENGTH
37' 6"
BEAM
10' 6"
375 NOMAD FE
LENGTH
37' 6"
BEAM
10' 6"
345 VALOR
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD SE
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD FE
LENGTH
34' 6"
BEAM
10' 6"
327 NOMAD
LENGTH
32' 7"
BEAM
9' 10"
327 VALOR
LENGTH
32' 7"
300 NOMAD
LENGTH
30' 0"
BEAM
9' 6"
477 Evolution
LENGTH
47’ 6”
BEAM
13’ 8”
I was wondering if someone could explain how exactly this setup works (if original). The toilet seems to work fine and flushes as expected, but there seems to be no option to pump overboard. There is a holding tank with a macerator attached icluding a T-junction and overboard valve , but no Y-valve. How is the macerator activated? Is it only supposed to run when flushing, or can it be used to pump overboard?