- This topic is empty.
Viewing 1 post (of 1 total)
Viewing 1 post (of 1 total)
- You must be logged in to reply to this topic.
51 PANACEA
LENGTH
51' 0"
BEAM
14' 8"
50 EVOLUTION
LENGTH
47' 6"
BEAM
13' 8"
475 PANACEA
LENGTH
47' 6"
BEAM
13' 8"
438 EVOLUTION
LENGTH
43' 0"
BEAM
12' 8"
43 NOMAD
LENGTH
42' 7"
BEAM
12' 8"
427 NOMAD FE
LENGTH
42' 7"
BEAM
12' 8"
41 VALOR
LENGTH
41' 8.5"
BEAM
11' 9"
409 VALOR
LENGTH
40' 0"
BEAM
11' 1"
41 PANACEA
LENGTH
40' 0"
BEAM
11' 9"
41 NOMAD
LENGTH
40' 0"
BEAM
11' 9"
407 NOMAD FE
LENGTH
40' 0"
BEAM
11' 1"
375 NOMAD SE
LENGTH
37' 6"
BEAM
10' 6"
375 NOMAD FE
LENGTH
37' 6"
BEAM
10' 6"
345 VALOR
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD SE
LENGTH
34' 6"
BEAM
10' 6"
345 NOMAD FE
LENGTH
34' 6"
BEAM
10' 6"
327 NOMAD
LENGTH
32' 7"
BEAM
9' 10"
327 VALOR
LENGTH
32' 7"
300 NOMAD
LENGTH
30' 0"
BEAM
9' 6"
477 Evolution
LENGTH
47’ 6”
BEAM
13’ 8”
“Proud to say I am a new owner of an oldie but goodie. I am currently looking to place a small tower on the t-top (no controls, no shade). The t-top is the extended version with vertical supports, not the angled version. It seems to have plenty of support in the area where the tower would be placed, almost as if it were designed to possibly have one. Weight would be limited to no more than 180-190 pounds. The console itself is the upgraded version, so plenty of room to step on the console and access the tower through the sunbrella. Question – any recommendations for manufacturers/fabricators of an appropriate tower?
Also looking to place a windlass in front, not a pulpit though. Any recommendations for that?
Thanks in advance. Peace out!”